RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Tow Sensor: Service and Repair
Towing Recognition Control Module
Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] See: Lighting and Horns/Service Precautions/Contact Corrosion.
Removing
Component location: in the base mount, inside the luggage compartment on the left side and behind the side trim panel
-
If control module is replaced, select "Replacement" function for appropriate control module in "Guided Functions" routine.
-
Remove the luggage compartment left side trim panel.
-
Remove the screws - arrows - and remove the base mount.
-
Unplug connectors.
-
Unlock the plate - 1 - on the base mount and remove it - arrow -.
-
Unlock the Towing Recognition Control Module ( J345) - 2 - from the plate- arrow -.
-
Remove the towing recognition control module.
Installing
Install in reverse order of removal, observing the following:
-
Install the luggage compartment left side trim panel.