RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-1777002.png)
-
When installing Clutch Pedal Starter Interlock Switch (F194), completely depress clutch pedal - 1 - in - direction of arrow A -. Hold clutch pedal
firmly in this position.
-
Guide Clutch Pedal Starter Interlock Switch ( F194) - 2 - through assembly opening while pressing plunger against clutch pedal and securing
switch by turning 45° in - direction of arrow B -.
-
Connect Clutch Pedal Starter Interlock Switch ( F194) connector - 3 -.
-
Install storage compartment on driver side.
