RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
/Page-2394002.png)
‹› Note installation location, refer to => [ Power Steering Gear ] See: Power Steering Gear
6 - Combi-bolt 40 Nm plus an additional 90° turn
‹› Always replace
7 - Hex head bolt
8 - Bolt
9 - Self-locking nut
10 - Stub axle carrier (steering arm)
11 - Banjo bolt, 47 Nm
12 - Seal
‹› Always replace
13 - Return hose
14 - Return line connection 40 Nm
‹› Colored marks must align
15 - Seal
‹› Always replace
16 - Cylinder bolt, 22 Nm
‹› Screw plug => [ Steering centering: ]
17 - Seal
‹› Always replace
18 - Extension hose
‹› Different versions
19 - Seal
‹› Always replace
20 - Banjo bolt with check valve, 35 Nm
21 - Extension hose
‹› For 4-cylinder engines
22 - Extension hose
‹› For 6-cylinder engines
23 - Tie Rod
‹› Removing and installing, refer to => [ Tie Rods ] See: Tie Rod/Service and Repair/Tie Rods
24 - Tie rod end
‹› Removing and installing, refer to => [ Tie Rods ] See: Tie Rod/Service and Repair/Tie Rods
Steering centering:
