RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
-
Take out steering gear through left-hand wheel housing (second technician required).
‹› Make sure that bulkhead boot is not damaged by steering gear pinion.
Installing
Center removed steering gear using Bolt for Steering Centering (VAS 6224).
-
To do this, remove hex socket-head bolt - 1 - from steering gear.
-
Move steering rack until centering position on rack - arrow - aligns with thread - 2 -.
-
Hand-tighten Bolt for Centering Steering Centering (VAS 6224).
-
Steering gear in area of bulkhead boot seat is lubricated with lubricant G 052 745 A3.
-
Position steering gear at plenum chamber (2nd technician needed).
Make sure threads and contact surfaces of bolts are free of oil and grease.