RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Rear Knuckle: Service and Repair
Wheel Bearing Housing, Aluminum, AWD
Wheel Bearing Housing, Aluminum, AWD
Removing
-
Remove drive axle hex socket head bolt. Refer to => [ Drive Axles ] See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle
Shaft Assembly/Service and Repair/Removal and Replacement/Rear Suspension/Drive Axles.
-
Remove wheels.
-
Remove securing bolts - 1 - from brake caliper.
-
Remove brake caliper and hang on body.
-
Remove disc brake.
-
Remove socket head bolt - 1 -.
-
Remove ABS wheel speed sensor - 2 - from wheel bearing housing.
-
Remove bolt - 1 - for coupling rod.