RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Tires: Removal and Replacement
New Tire, Mounting
New Tire, Mounting
-
Make sure wheel rim is clean.
-
Replace wheel electronics after using tire sealant as the accumulation of sealant on the pressure sensor can cause false readings.
-
Insert a new tire valve.
-
Remove valve insert.
-
Inflate tire to approx. 3 to 4 bar, tire bead must audibly slide over rim hump.
-
Install valve insert.
-
Correct inflation pressure to prescribed specification.
-
Balance wheel.