RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
-
Remove eyelet for Engine Sling (2024 A).
-
Re-insert bolts - 1 - in middle engine sling hole and secure with a spring clip.
-
Insert Engine Sling (2024 A) bolts at Engine Support Bridge (10-222 A) spindle.
-
Engage Engine Sling (2024 A) in front lifting eye and in Shackle (10-222 A /12) on rear of engine.
CAUTION!
Mounting hooks and connecting pins on engine sling must be secured with plug connectors - arrows -.
-
Take up weight of engine on support bar spindle a little, but do not lift.
-
Remove both front wheels.
-
Loosen quick-release connectors - 1 -, remove screws - 2 - and remove noise insulation.