RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Shifter M/T: Removal and Replacement
Selector Rod, Connecting Rod and Push Rod Assembly Overview
Selector Rod, Connecting Rod and Push Rod Assembly Overview
‹› Lubricate mounting areas and slide surfaces with Grease (G 000 450 02).
1
Ball socket
‹› to remove, bend peening on selector rod => [ (Item 19) Selector rod ]
2
Washer
3
Bushing
‹› to remove, remove retaining clip => [ (Item 9) Retaining clip ]
4
Boot
5
Transmission shift lever
6
Nut - 20 Nm
7
Bolt, 20 Nm
8
Connecting rod
‹› to remove, remove retaining clip => [ (Item 9) Retaining clip ]