RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
‹› Pulling hook (T20143)
‹› Driver (T40109)
‹› Sealing grease (G 052 128 A1)
‹› 2 hex bolts M 8 x 30
Removing
‹› Rear final drive installed
Observe general repair notes => [ General Repair Information ] See: Service and Repair/Procedures/Rear Final Drive 0AR (02XA,0A3A,09EA,09LA
Transmission).
-
Remove rear part of exhaust system from clamping sleeves - arrows -.