RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Front Door Window Glass Weatherstrip: Service and Repair
Window Shaft Strips, Removing and Installing
Window Shaft Strips, Removing And Installing
Special tools, testers and auxiliary items required
-
Trim removal wedge 3409
Removing
-
Using Trim Removal Wedge 3409 - 1 -, press upper edge of rubber strip - 2 - down until it slides over upper edge of window shaft strip - 3 -.
-
Pull Trim Removal Wedge 3409 along strip - arrow - in this position.
-
Remove strip.
Installing
NOTE:
-
Only use Cleaning Solution D 009 401 04 as an installation aid.
-
If other lubricants are used, the trim may fall off due to vibrations.
-
Engage at top and lightly press down - rail slides over rubber
-
Engage top of trim - 3 -.
-
With flat hand, press trim down until rubber - 5 - slides over lower edge - 4 -.
-
Pull with hand in this position over complete trim.