RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
‹› To adjust rear lifting unit - 1 -, door does not need to be disassembled.
‹› Adjust front lifting unit - 2 -.
-
Raise window (window is in short lift).
-
Remove rubber stops - arrow -.
-
Loosen rear lifting unit lower nut through opening - 1 -.
-
Slide lifting unit in elongated hole toward door outer panel as far as stop.
-
Tighten rear lifting unit and seal opening with rubber plugs.
Tightening torques => [ Window Regulator Assembly Overview ] See: Service and Repair/Front Door Window Regulator Assembly
Overview.
Adjusting (front lifting unit)
-
Remove window regulator motor, speaker and door insulation.