RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
/Page-3120001.png)
CD Changer: Service and Repair
Radio System
CD Changer
Special tools, testers and auxiliary items required
‹› Radio Removal Tool (T10057)
-
Turn off all electrical consumers.
-
Remove ignition key.
Removing
-
Open glove box.
-
Insert two clips on Radio Removal Tool (T10057 ) in release slits on CD Changer (R41) until they engage. Points on grip eyes face outward.
-
Remove CD Changer (R41) from installation frame using grip eyes on Radio Removal Tool (T10057).
-
Release connectors on CD Changer (R41) and remove.
-
Remove Radio Removal Tool (T10057), push locking tabs on CD Changer (R41) to do so.
Installing
-
Connect harness connector.
-
Slide CD Changer (R41) into mounting frame until it engages.
-
Check the wiring connection to Radio (R) (not radio generation II). Refer to => [ Radio/CD Changer Wiring, Checking, through November 2006 ]
See: Testing and Inspection/Component Tests and General Diagnostics/Radio System after installing.
