RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
/Page-3259001.png)
Front Bumper Reinforcement: Service and Repair
Front Bumper Crossmember
Front Bumper Crossmember
-
Bumper removed.
-
Remove signal horn - 4 -.
-
Disconnect hose - 5 - of headlamp cleaning system on both sides (press release buttons).
-
Unscrew bolts - 3 - of right spray jet for headlamp cleaning system - spray jet remains installed.
-
Remove bolts - 1 - (qty. 5).
-
Pry off retaining clips - 2 - (qty. 3).
-
Swivel spray jet for headlamp cleaning system to the side and remove crossmember from bumper cover.
