RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
Front Bumper Reinforcement: Service and Repair
Front Bumper Crossmember to Impact Absorber Mount
Front Bumper Crossmember to Impact Absorber Mount
‹› Impact absorber is self-adjusting, meaning it can compensate bearing tolerances in height between crossmember and Impact absorber when
installing the bolt.
‹› This holds and secures the crossmember automatically in the previously adjusted position when installing the bolt - 1 -.
1
Screw
‹› 23 Nm
2
Lower carrier bushing
‹› Plastic part pressed into adjusting screw.
‹› No replacement part.
3
Lower adjusting screw
‹› Before assembling bumper crossmember, install completely but do not tighten.
‹› Left-hand thread
‹› No replacement part.
4
Lower threaded bushing