RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
Console: Procedures
Holes For Telephone Handset Holder on Center Console, Drilling
Holes For Telephone Handset Holder On Center Console, Drilling
The center console is delivered as a replacement part without the holes for the cell phone retainer. The holes must be made later.
-
Remove center console:
-
Center console, removing and installing - USA and Canadian vehicles up to 10.04.
-
Center console, removing and installing - USA and Canadian vehicles from 11.04.
-
Create holes with the following dimensions.
a
-
10 mm
b
-
6 mm
c
-
22 mm
d
-
101 mm
e
-
25 mm
f
-
16 mm
g
-
5 mm
h
-
8 mm
-
Clip the threaded hole piece from behind into center console and tighten cellular phone holder to 1.5 Nm.
NOTE: After installation, check whether the glove compartment will open.