RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
Passenger Assist Handle: Service and Repair
Roof Trim, Sedan
Roof Grab Handle
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1783)
Removing
-
Open covers - 3 -.
-
Remove the bolts - 2 -.
Tightening specification: 3.5 Nm
-
Remove roof grab handle - 1 -.
‹› Threaded holes for roof grab handle must be cleaned of locking compound residue after removal. Otherwise, new screws could lock up when
installed and shear off when removed again.
‹› They can be cleaned with a thread cutter.
‹› Replace roof grab handle screws (self-locking).
Installing
To install, perform the steps used in removal in reverse order.