RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
Seat Heater: Removal and Replacement
Seat Heating Element, Removing and Installing
Seat Heating Element, Removing And Installing
Seat Heating Element (glued In), Removing And Installing
Removing:
-
Remove seat: Vehicles until 10.04, vehicles from 11.04.
-
Remove seat cover.
-
Cut wire - 2 - off of old heating element - 1 -.
Installing:
-
Align heating element - 1 - on seat surface, remove protective foil and glue heating element to cushion.
-
Slide electrical wire - 2 - into openings - 3 -.
-
Lay wire connections without crossing into bottom of openings at positions - 4 -.