RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
/Page-1754001.png)
Brake Caliper: Removal and Replacement
Brake Caliper Component Overview, Brembo
Brake Caliper Component Overview, Brembo
‹› Only use methylated spirits to clean brake parts.
‹› When carrying out repairs, install all parts supplied in the repair kit.
‹› New brake calipers are filled with brake fluid and pre-bled.
‹› Apply a thin coat of lithium grease (G 052 150 A2 ) to the brake cylinders, pistons and seals.
1
Dust cap
‹› Install onto the bleeder valve.
2
Bleeder valve, 12 Nm
‹› Apply a thin coat of lithium grease (G 052 150 A2 ) to the threads before installing.
3
Brake caliper housing
4
Seal, 32 mm piston
‹› Removing and installing, refer to => [ Caliper Piston, Brembo ] See: Overhaul/Front/Caliper Piston, Brembo.
5
Seal, 28 mm piston
