RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
-
Rotate intake camshaft to "TDC" and tighten camshaft adjuster screw - 2 - on camshaft with a socket SW 24 - 1 - inserted between.
‹› To tighten bolt, counterhold socket with pliers if necessary.
-
Position a lever or ratchet with Socket (T10035 ) on screw and rotate camshaft until threaded holes for Camshaft Clamp (T40070) face up.
-
Next, loosely fasten Camshaft Clamp (T40070) to intake camshaft.
‹› The Camshaft Locating Tool (T40070) is correctly positioned when the holes for the cylinder head bolts remain free.
-
Adapt camshaft adjuster screw - 2 - and socket 24 - 1 - to exhaust camshaft.