RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
/Page-780010.png)
-
Rotate exhaust camshaft until threaded hole for Camshaft Clamp (T40070) faces up.
-
At the same time, position a counter-hole SW 24 on Camshaft Clamp (T40070) and swing Camshaft Clamp (T40070) against exhaust camshaft to
install - arrow -.
-
Tighten Camshaft Clamp (T40070) by hand onto exhaust camshaft to avoid damaging threads (2nd technician needed).
-
Tighten Camshaft Clamp (T40070) screws to 25 Nm.
-
Using Socket (T40058), rotate crankshaft in direction of engine rotation - arrow - to "TDC".
