RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
-
Disconnect electrical harness connectors at ignition coils.
-
Press electrical wiring harness to side.
-
Remove all ignition coils using Ignition Coil Puller (T40039).
-
Using Spark Plug Removal Tool (3122 B), remove spark plugs.
-
Check compression using Compression Tester (V.A.G 1763 ).
‹› Using tester => operating instructions.
-
Have a second technician press accelerator pedal completely and at the same time operate starter long enough until pressure increase no longer
appears on tester.
-
Repeat procedure on each cylinder.
Assembling
Assembly is in reverse order of removal, note the following:
-
Install the spark plugs.