RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
/Page-872004.png)
-
Remove front coolant pipe at engine and at coolant pump.
-
Disconnect electrical connector - 2 - at Oil Level Thermal Sensor (G266).
-
Place Used Oil Collection and Extraction Device ( V.A.G 1782) under the engine.
-
Remove the oil pan lower section - 1 - and carefully remove it from the bond.
-
Remove oil pump. Refer to => [ Oil Pump ] See: Oil Pump/Service and Repair/Oil Pump.
-
Remove bolts - 1 to 7 - for upper section of oil pan.
