RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
‹› Initial tightening specifications: 60 Nm
‹› Final tightening specifications: 80 Nm plus an additional 90° turn
6
Camshaft adjuster for intake camshaft
‹› Identification "Intake"
‹› Removing and installing, refer to => [ Camshaft Timing Chains, from 03.2007 ] See: Camshaft Timing Chains, From 03.2007
7
Right camshaft timing chain
‹› Before removing, mark direction of rotation with paint. Reversing the rotation direction of a used chain can destroy it
‹› Remove from camshafts, refer to => [ Camshaft Timing Chains, from 03.2007, Removing from Camshaft ] See: Camshaft Timing Chains,
From 03.2007, Removing From Camshaft
‹› Removing and installing, refer to => [ Camshaft Timing Chains, from 03.2007 ] See: Camshaft Timing Chains, From 03.2007
8
Chain tensioner for right camshaft timing chain
‹› Removing and installing, refer to => [ Camshaft Timing Chains, from 03.2007 ] See: Camshaft Timing Chains, From 03.2007
9
Guide piece
10
Oil strainer
‹› Set into the chain tensioner
‹› Installation position: Observe locating tabs on circumference
11
Gasket
‹› Replace
‹› Clipped onto the chain tensioner
12
5 Nm plus an additional 90° turn
‹› Replace
13
Thrust washer for drive sprocket
14
Drive sprocket for right camshaft timing chain
Location of the Mounting Pins for the Camshaft Timing Chain Drive Sprocket