RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
/Page-2773004.png)
-
Check the distance of refrigerant line - B - from screw - D - and the bracket. If necessary, install wear protection - C - (e.g. a rubber star as a
spacer)
‹› If reservoir - A - with part number "8E0 820 193 " to index "F" was replaced by a reservoir with the same part number starting from index "P".
wear protection - C - (e.g. a rubber star as a spacer.) must always be installed.
-
Check the routing of the refrigerant lines. They must not touch other components and must be far enough away to avoid wear. If necessary, install
wear protection.
-
Re-install remaining components removed.
-
Evacuate and re-charge refrigerant circuit.
