RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
/Page-3956001.png)
Headlamp Bulb: Service and Repair
High Beam Headlamp, Replacing Bulb
Halogen Headlamps
CAUTION!
Before beginning repairs on the electrical system:
‹› Obtain the anti-theft radio security code.
‹› Switch the ignition off.
‹› Disconnect the battery Ground (GND) strap.
‹› After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows
according to Repair Information and/or Owner's Manual.
‹› Steps after reconnecting voltage supply => See: Starting and Charging/Battery/Description and Operation/Battery.
High Beam Headlamp, Replacing Bulb
Removing
-
Remove headlamp => [ Halogen Headlamps ].
-
Remove housing cover from headlamp housing.
-
Rotate light bulb counter clockwise - arrow - and remove it from headlamp housing.
-
Disconnect electrical harness connector - 1 - at bulb.
Installing
Installation is reverse of removal, paying attention to the following:
-
Do not touch glass portion with bare hands.
-
Secure light bulb by turning clockwise.
-
Secure housing cover using wire clamp.
-
Install headlamp.
