RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
/Page-4084001.png)
Combination Switch: Service and Repair
Steering Angle Sensor
Steering Angle Sensor
Removing
-
Remove return spring with slip ring. Refer to => [ Airbag Spiral Spring/Return Spring With Slip Ring ] See: Airbag Spiral Spring/Return Spring
With Slip Ring.
-
Remove Steering Angle Sensor (G85) - item 1 - - arrow -.
Installing
Install in reverse order.
-
After replacing the steering angle sensor (G85), adapt it in "Guided Fault Finding"Vehicle diagnosis, testing and information system VAS 5051.
