RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
Alignment: Service and Repair
Rear Axle Camber, Adjusting
Rear Axle Camber, Adjusting
-
Remove wheel bearing housing/transverse link connection nut - A -.
-
Adjust camber by turning eccentric bolt - B -.
‹› The maximum adjustment range is 90° to left or right of center position.
‹› For a better illustration, camber adjustment is shown with wheel removed.
-
Install new nut - A - and tighten
-
After tightening nut - A -, check camber value once more. Refer to => [ Wheel Alignment Specifications ] See: Specifications/Wheel Alignment
Specifications.