RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
Maintenance Required Lamp/Indicator: Service and Repair
Resetting Service Display After Service
Your authorized Audi dealer will reset the display after performing the scheduled service. If the service is not performed by an authorized Audi dealer,
the display must then be reset as follows:
Switch OFF ignition.
Press and hold button the Service button -1- then switch on the ignition. One of the following messages appears in the display
"SERVICE IN ____ MILES" or "SERVICE!".
Press the reset button -2- until either of the following messages appears in the display:
"SERVICE IN ____ MILES ___DAYS" or "SERVICE!".
After about five seconds the display switches back.
TIPS!
Do not reset the display between service intervals. Doing so will result in an incorrect display.
The service display information will remain intact even if the battery is disconnected.
If a priority 1 malfunction is detected (red symbol), you cannot display the distance remaining.