RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
/Page-2320001.png)
Wiring Harness: Technician Safety Information
Wiring Harnesses and Connectors Safety Precautions
CAUTION!
‹›
Wiring harness and connector repairs on the vehicle electrical system are only to be performed using wiring harness repair set ( VAS
1978).
‹›
Pay attention to the relevant regulations in the individual countries.
‹›
Disconnecting the battery negative ( - ) terminal prevents accidents when working on electrical system. Disconnect battery. Audi A4 &
S4=> [ Battery, Engine Compartment, Disconnecting and Connecting ] See: Starting and Charging/Battery/Service and
Repair/Removal and Replacement/Battery, Engine Compartment, Disconnecting and Connecting. Audi RS4 => [ Battery, Luggage
Compartment, Disconnecting and Connecting ] See: Starting and Charging/Battery/Service and Repair/Removal and
Replacement/Battery, Luggage Compartment, Disconnecting and Connecting.
‹›
Heed stickers on vehicle pointing out components with high voltage. Remaining voltage must be dissipated before commencing repair
work.
‹›
Before commencing repair work, always eliminate cause of damage, e.g. sharp body edges, malfunctioning electrical components,
corrosion etc.
‹›
Do not loosen ground straps on body if this can be avoided (danger of corrosion).
