RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
/Page-1203002.png)
-
Remove the wiper arm nuts - 4 - and the wiper arms - 2 -.
-
Disconnect the retaining clips - 1 - and remove the cowl grille - 5 -.
-
Remove the E-Box cover screws and cover- arrows -.
-
Using a screwdriver, carefully remove the mounting bracket - arrow - and the Engine Control Module (ECM) (J623 ) from the E-Box.
CAUTION!
After heating, parts are extremely hot. To prevent personal injury, avoid touching the protective housing after heating the shear bolts
and surrounding area.
