audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Limiting Possible Fault Causes|Page 3889 > < Limiting Possible Fault Causes
Page 1
background image

Information Bus: Testing and Inspection
Determining Fault In Comfort Data Bus System

Comfort Data Bus System, Checking

‹› If the connector is disconnected from a control module connected to the comfort data bus system and the ignition is switched on, a fault entry can

occur in the other control modules connected to the comfort data bus system. The same is true if the voltage supply is interrupted by activation of a
fuse for example.

‹› The instrument cluster control module (J285) forms the interface between the two data bus systems. It is also the determining control module in the

comfort data bus system. Via adaptation the control modules connected to the comfort data bus system in this vehicle are entered
(equipment-dependent). Refer to => Vehicle Diagnosis, Testing and Information System VAS 5051 in the "guided fault finding" function.

‹› The wiring diagrams can be used to determine how many control modules are connected to the comfort data bus system.

Determining Fault in Comfort Data Bus System

-

Connect the Vehicle Diagnosis, Testing and Information System (VAS 5051A) e.g. via the diagnostic cable (VAS 5051/5A) and the K-wire
adapter ( VAS 6017B), or in vehicles up to VIN "399999" of model year 2005 (Sedan and Avant) and "012913" of model year 2005 (Cabrio).
Refer to Parts catalog via the K-wire adapter (VAS 6017A ) to the vehicle's 16-pin data link connector with the ignition off. Refer to => [ VAS
5051A, Connecting and Selecting Functions ] See: Heating and Air Conditioning/Testing and Inspection/Scan Tool Testing and Procedures/VAS
5051A, Connecting and Selecting Functions.

-

Switch the ignition on.

-

Select the "00 - query the DTC memory - entire system" function. 

Indication on display of the Vehicle Diagnosis, Testing and Information System (VAS 5051A):

All address words stored in the Vehicle Diagnosis, Testing and Information System (VAS 5051A) are transmitted consecutively via the data line to the
vehicle

Indication on display of the Vehicle Diagnosis, Testing and Information System (VAS 5051A):

Limiting Possible Fault Causes|Page 3889 > < Limiting Possible Fault Causes