RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
/Page-1285004.png)
-
Guide nozzle of hot air gun on to shear bolt of protective housing.
-
Switch the heat gun on and heat the bolt for approximately 20 to 25 seconds.
-
Remove shear bolts with locking pliers - arrow -.
‹› The threads of both shear bolts - 3 -, that are screwed into the ECM, are not coated with a locking compound. The threads in the ECM housing
must not be heated and do not require to be heated (unintentional heating of the ECM).