RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
/Page-1352001.png)
Throttle Position Sensor: Service and Repair
Accelerator Pedal Module With Throttle Position (TP) Sensors, Removing And Installing
Removing
-
Remove driver side storage tray.
-
Disconnect electrical connector - 2 -.
-
Remove bolts - 1 - and - 3 -.
-
Remove accelerator pedal module.
Installing
Installation is in reverse order of removal. Note the following:
-
Install driver side storage tray.
Vehicles with automatic transmission:
-
On vehicles with automatic transmission, the kick-down function must be adapted if the throttle position sensor or engine control module are
replaced.
Torque specifications
Accelerator pedal module to pedal mount
10 Nm
