RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
/Page-1381002.png)
Specified value: 22,0 to 30,0 ohms.
If the specified value was not obtained:
-
Replace the Evaporative Emission (EVAP) Canister Purge Regulator Valve (N80).
If the specification is obtained:
Checking voltage supply
-
Using a Multimeter, check the electrical harness connector terminal 1 to 2 for voltage.
-
Operate the starter briefly.
Specified value: battery voltage.
If the specified value was not obtained:
-
Using a Multimeter, check the electrical harness connector terminal 1 to Ground (GND) for voltage.
-
Operate the starter briefly.
Specified value: battery voltage.
