RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
Fuel Gauge Sender: Service and Repair
Fuel Level Sensor
Fuel Level Sensor
Removing
Observe safety precautions. Refer to => [ Safety Precautions ] See: Service Precautions/Vehicle Damage Warnings/Safety Precautions/Fuel Supply
System.
Observe rules for cleanliness. Refer to => [ Clean Working Conditions ] See: Service Precautions/Vehicle Damage Warnings/Clean Working
Conditions/Fuel Supply System.
-
Remove fuel delivery unit. Refer to => [ Fuel Delivery Unit ] See: Fuel Pump.
-
Release retaining tabs - arrows - with a screwdriver and pull the Fuel Level Sensor (G) upward and out.
CAUTION!
Before remove electrical connectors on Fuel Level Sensor (G), first release contact retaining tabs.
-
Disengage electrical connector retaining tabs - 1 - and - 2 - and disconnect them.
Installing
Installation is in reverse order of removal, note the following:
-
Connect the electrical connections - 1 - and - 2 - and check that they are securely engaged.