RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
1
TORX Bolts (T30) (Qty. 2)
‹› Tightening specification 7 Nm
2
Steering Wheel
‹› Removing and installing, Refer to => Steering See: Steering and Suspension/Steering
3
Spiral Spring Connector
4
Airbag Unit Connector
5
Airbag Unit
‹› Removal:
-
Disconnect the battery ground (GND) strap.
-
Release steering column adjuster.
-
Pull steering wheel - 2 - as far out as possible and up.
-
Position steering wheel - 2 - vertically.
-
Remove one TORX bolt (T30)- 1 -.
-
Turn steering wheel back a half turn and loosen second TORX bolt (T30) - 1 -.
-
Remove airbag unit connector - 4 -.