RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
-
Remove the passenger seat. Refer to => [ Power Front Memory Seat ] See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Power Front Memory Seats.
-
Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).
-
Attach the front seat to the fixture for seat repair (VAS 6136).
-
Remove the backrest. Refer to => [ Front Backrest ] See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Power Front
Memory Seats/Front Backrest.
-
Disconnect connector - 6 -.
-
Remove bolts - 2 - (Qty. 2).
-
Remove cover upholstery. Refer to => [ Front Seat Covers and Upholstery ] See: Body and Frame/Seats/Service and Repair/Overhaul/Seats -
Upholstery, Covers/Front Seat Covers and Upholstery, for power seat => [ Seat Pan Cover and Cushion, Standard Seat ] See: Body and
Frame/Seats/Service and Repair/Overhaul/Seats - Upholstery, Covers/Front Seat Covers and Cushion, Power Memory Seats.
-
Open the guide clip - 8 -.
CAUTION!
Connectors - 3 - and - 7 - must not be separated.
-
Slide pressure sensor -G452- - 4 - along the side of the bracket - 9 -.
2
Bolts
‹› 2.5 Nm
3
Connector on Seat Occupied Recognition Control Module -J706
‹› Must not be separated under any circumstances.
4
Passive Occupant Detection System Pressure Sensor -G452
5
Pressure Hose
6
Connector Between Service Kit and Seat Wiring Harness
7
Connector on Seat Occupied Recognition Pressure Sensor -G452
‹› Must not be separated under any circumstances.
8
Guide Clip
9
Retaining Bracket
Service Kit, Removing