RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
1
Nut (T40034/1) or (T40034/2)
2
Press Piece (T40033/1)
3
Support Ring (T40033/2)
4
Tube (T40033/3)
5
Mount (T40033/4)
6
Hollow Piston Cylinder ( HKZ-15)
7
Press Piece (E-5)
8
Special Nut (E-8-214)
9
Spindle (T40034)
10 - Subframe
-
Pretension special tools.
-
Remove hydraulic mounting by operating pump.
‹› When removing hydraulic mounting with special tool Wheel Bearing Tool (V.A.G 1459 B), you must cut back.
Pull in front or rear hydraulic mounting
Front and hydraulic mountings are different. Make sure that correct allocation when installing.
Hydraulic mounting must be installed in the correct direction, note marking on subframe.
-
Insert special tool with hydraulic mounting in subframe as shown.
Make sure that correct location when inserting Mount (T40033/6).
1
Nut (T40034/1) or ( T40034/2)
2
Mount (T40033/6)