audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Checking After Removal|Page 8151 > < Checking After Removal|Page 8149
Page 1
background image

Suspension Strut / Shock Absorber: Component Tests and General Diagnostics
Shock Absorbers, Leaking

Shock Absorbers, Leaking

Shock absorbers are frequently rejected and exchanged because of leaks. Examinations on the test stand and on the vehicle have shown that the
replacement of a large number of rejected shock absorbers was not justified.

Slight leaking of oil ("sweating") at piston rod seal is no reason to replace a shock absorber. A shock absorber damp with oil is OK under the
following circumstances:

‹› Oil leak (shown screened in illustration) is visible, but dull, matte and possibly dry from dust

‹› Oil excretion extends from upper shock absorber connection (piston rod oil seal) no further than lower spring plate - arrow -

‹› Minor oil excretion is advantageous since piston rod oil seal gets lubricated, which increases service life. This is true for front and rear shock

absorbers.

Checking After Removal|Page 8151 > < Checking After Removal|Page 8149