RS 4 Quattro Sedan V8-4.2L (BNS) (2007)
/Page-1689003.png)
-
Remove right flange shaft by fastening puller ( T10037) to transmission housing - arrow -.
Securing Ring, Removing and Installing
-
Clamp flange shaft in vise, using jaw protectors. Press previous circlip out of flange shaft grooved with new circlip - A -.
Flange Shaft Sealing Ring, Removing
-
Pry out flange shaft seal using a lever.
Left Flange Shaft Sealing Ring, Installing
