RS 6 V8-4.2L Turbo (BCY) (2003)
-
Let radio sit without power for 1 hour.
-
Reconnect radio to power supply.
-
Press eject button.
Symphony & Symphony II
-
Remove radio.
-
Disconnect radio from power supply.
-
Give the radio a couple of shakes to attempt to move CD back into the normal slot.
Note:
Do not open radio to remove CDs. This will void your warranty claim.
-
Listen carefully for any movement.
-
Listen for any loose change that may have been inserted into radio.
-
Reconnect radio to power supply.
-
Listen for trays to position themselves.
^
If no sound is heard, the CD is still jammed. If eject button is pressed at this time, radio may display "SLOT EMPTY".
^
This indicates that the sensor which detects the CDs in their trays has not been able to scan all trays.
^
This is not an indication of presence, or lack thereof CDs.
During normal operation the CD is located towards the rear of the radio.
If a CD is jammed, the CD will be located towards the front of the radio.
Attempt to get the CD back into position as follows:
Concert & Concert II
-
Remove radio.
-
Disconnect radio from power supply.
-
Let radio sit without power for 1 hour.
-
Reconnect radio to power supply.
-
Press eject button.
Symphony & Symphony II
-
Remove radio.
-
Disconnect radio from power supply.
-
Give the radio a couple of shakes to attempt to move CD back into the normal slot.
Note:
Do not open radio to remove CDs. This will void your warranty claim.
-
Listen carefully for any movement.
-
Listen for any loose change that may have been inserted into radio.
-
Reconnect radio to power supply.