RS 6 V8-4.2L Turbo (BCY) (2003)
4
-
Spring
-
Installation position Fig. 2.
-
Grease spring with G 052 745 A3
5
-
Pivot pin
-
Pay attention to different pin lengths
-
Peening Fig. 1.
6
-
Pivot pin
-
Pay attention to different pin lengths
-
Peening Fig. 1.
7
-
Clip
8
-
Fulcrum lever
9
-
Locking pin
-
Installing Fig. 3.
Fig. 1 Peening pivot pins
NOTE: Before peening the pivot pins, protect painted surfaces with a fabric-backed adhesive tape.
-
Support pre-assembled door handle on solid surface (e.g. jaws of vice).
-
Secure pivot pins against falling by creating a light center punch mark.
-
After peening pivot pins, check fulcrum lever for freedom of movement.