RS 6 V8-4.2L Turbo (BCY) (2003)
/Page-4938001.png)
Trunk / Liftgate Stop: Adjustments
Stop Buffers, Adjusting
-
Open rear lid.
-
Press in spring pin in direction of arrow using Phillips-head screwdriver.
-
Lock spring pin by turning counterclockwise (arrow - A -).
-
Screw in stop buffer (- 1 -) until fully home.
-
Unscrew stop buffer again in stages.
When correctly adjusted, the stop buffers make light contact with the rear sill trim when the rear lid is closed.
-
Unlock spring pin by turning clockwise (arrow - B -).
