RS 6 V8-4.2L Turbo (BCY) (2003)
-
Install:
-
Attach after painting sill panel protective foil - 12 -
-
Attach outer scuff plate -2 - with tie-clips - 13 - to sill panel trim
-
Bolt sill panel trim on first with screws - 1 -, - 3 - and - 7 -.
-
Remove protective plastic film off of double-sided tape - 11 - during installation of sill plate
-
Attach end piece - 10 -.
-
Attach sill panel trim and wheel housing liner - 6 - and - 8 - with the screws - 5 - and - 9 -.
5
-
Screw
-
2 Nm (18 in.lb)
-
3x
6
-
Wheel housing liner-Front