RS 6 V8-4.2L Turbo (BCY) (2003)
Trim Panel: Service and Repair
Lower A-Pillar Trim, Removing and Installing
Lower A-pillar Trim, Removing And Installing
-
Pry out cover - 1 -.
-
Remove screws - 2 - (2x).
Tightening torque: 2.5 Nm (22 in lb)
-
Pull lower A-pillar trim in direction of - arrow A - until pin - 3 - can be detached from groove - 4 -.
-
Pull extension of lower A-pillar trim in direction of - arrow B - out of retainers (2x).