RS 6 V8-4.2L Turbo (BCY) (2003)
-
Press trim - 1 - at clip - 7 - until full engagement.
-
Securely clip D-pillar trim - 1 - (3x).
CAUTION: Make sure trim is secured properly.
2
-
Rear grab handle
3
-
Bolts (2x)
-
Tightening torque: 3.5 Nm (31 in lb)
-
Self-locking
-
Always replace
-
Always clean threaded holes for bolts (e.g. using a tap)
-
For loose (threaded) inserts, tighten inserts using pliers.