RS 6 V8-4.2L Turbo (BCY) (2003)
/Page-5101002.png)
-
Detach condenser from lock carrier (do not disconnect lines) and secure with wire (i.e. at front wheel).
NOTES:
-
The condenser must not be suspended by its lines.
-
Condenser lines must not be bent or kinked.
-
Detach hydraulic fluid cooler Fig. 1. (do not disconnect lines).
NOTES:
-
The hydraulic fluid cooler must not be suspended by its lines.
-
Hydraulic cooler lines must not be bent or kinked.
-
Disconnect lines from ATF cooler (if equipped).
