RS 6 V8-4.2L Turbo (BCY) (2003)
Seat Heater: Service and Repair
Seat Cushion Extension Heating Element, Removing and Installing
Seat Cushion Extension Heating Element, Removing And Installing
1
-
Seating area extension with heating element, attached to foam cushion.
Removing
-
Remove seat.
-
Remove seat surface extension - 1 - and disconnect both harness connectors - 2 - of the heating element for the seat surface extension.
-
Remove seat cushion extension cover.
-
Disconnect wire for seat cushion extension from foam cushion - 3 -.
Installing
-
Cut cable from old heating element.
-
Secure new heating element onto old heating element without folding or creasing.
-
Pull wire for seat cushion extension through cut in foam cushion - 3 -.