RS 6 V8-4.2L Turbo (BCY) (2003)
-
Install plastic wedge - 2 - in laterally under the spoiler to aid in dislocating spoiler
-
After screw mounting (outside marking) route cut wire - 3 - under spoiler - 1 - through adhesive.
-
Pull cut wire in direction of - arrow - up to middle screw mounting through adhesive.
-
Repeat procedure on opposite side of spoiler - 1 - to cut spoiler completely free.
-
Remove spoiler - 1 - from rear lid.
- 2 - Textile-strengthened tape.