RS 6 V8-4.2L Turbo (BCY) (2003)
/Page-3217002.png)
^
Check degree of wear (wear limit)
6. Hexagon socket head bolts
^
M10 x 60
^
Always renew
^
M10 x 125 x 50
Tightening torque:70 Nm plus an additional 90° 1/4 turn M10 x 10 x 20
^
Tightening torque: 95 Nm
7. Brake carrier with guide pin and protective cap
^
Supplied as replacement part assembled with sufficient quantities of grease on guide pins
^
If protective caps or guide pins are damaged, install repair kit. Use grease packet supplied to lubricate guide pins.
8. Banjo bolt, 40 Nm
9. Brake line with banjo union Hose must not be twisted when installed
^
Unbolt from brake carrier when changing pads
^
Do not disconnect brake hose when changing brake pads
10. Seals
